Ecoman :: Perfection in size Reduction Technology

Jaw Crusher

The inside Story.....................

01. Hinge pin on crushing chamber centerline for crushing without rubbing, Large bearings and integral lubrication

02. Wide entry throat ensures easy feeding to crushing chamber

03. Fabricated swing jaw is balanced to avoid power losses through lifting on crushing stroke

04. A light small diameter flywheel is all that is necessary with the low inertia of the mechanism

05. Operating mechanism is totally enclosed for maximum life and minimum maintenance

06. Double toggles provide maximum leverage to long stroke eccentric Pull black and lifter springs automatically compensate for wear

07. Light weight pitman is always in compression and bears directly on the underside of the eccentric

08. All adjustment are carried out on the fixed jaw to avoid disturbing the crushing geometry

20X10

CAPACITY POWER SPEED
	FEED-POWER SPEED				CAPACITIES TONS PER HOUR CRUSHER SETTING (CLOSE SIDE )
ECOMAN JAW CRUSHER SIZE	MAX. FEED SIZE mm	MOTOR HP	MOTOR SPEED RPM	CRUSHER SPEED RPM	INS 3/4 MM 20	1" 25	1.5" 32	2" 50	2.5" 65	3" 75	3.5" 90	4" 100	5" 125	6" 150	7" 180	8" 200	9" 230	10" 250	11" 280	MAX. FEED SIZE mm
12 X7 300X175	125	15	1440	365-400	8	9	10	15	18
16X6 400X150	115	25	1440	365-400	13	17	20	25	30	40
16X9 400X175	175	25	1440	365-400		15	17	20	25	30
20X10 500X250	200	30	1440	365-400		15	17	18	24	34
24X12 600X300	250	30	1440	365-400				30	40	45	50
30X6 750X150	115	30	1440	400-450	18	22	27	31	36
30X15 750X375	300	40	1440	350-380					45	50	65	75	85
30X20 750X500	400	40	1440	350-375					44	50	65	75	85	115
36X6 900X150	115	40	1440	350-400	27	31	36	40	45
36X24 900X600	500	75	1440	325-360							100	115	130	155
42X6 1050X150	115	50	1440	350-400	36	40	45	49	54
42X24 1050X600	500	120	1440	300-350									140	160	180	200	210	230	240
42X30 1050X750	650	150	1440	300-320									140	160	180	200	210	230	240
48X10 1200X200	200	75	1440	300-375		48	52	56	64	80	88	92	96
60X48 1500X1200	1000	200	1440	225-275											350	405	460	510	520	610

Specification

List of dimensions gives approximate sizes only and serve as a guide only for plant arrangement. They should not be accepted as the actual dimensions.

We reserve the right to make any alterations, or Modifications which we consider an improvement.

For actual installation work ask for GA drg

D I M E N S I O N S
JAW CRUSHER	FEED OPENING		C	D	E	F	G	H	I	J	K	L	M	N	O	P	P1	P2	Q	R	APPROX.WT. IN TONNES
JAW CRUSHER	A	B	C	D	E	F	G	H	I	J	K	L	M	N	O	P	P1	P2	Q	R	APPROX.WT. IN TONNES
300 12	300 12	175 7	750	245	450	1000	480	480	768	75	475	530	915	140	100	540	540	-	M24	584	1.2
400 16	400 16	150 6	970	335	635	1110	530	635	780	80	490	730	915	465	98	602.5	602.5	-	M24	584	2.6
400 16	400 16	225 9	970	335	635	1110	530	635	850	80	490	730	915	165	98	602.5	602.5	-	M24	725	3.5
500 20	500 20	250 10	1040	390	680	1255	640	770	885	100	540	880	915	465	135	610	610	-	M24	725	3.5
600 24	600 24	300 12	1140	820	450	1415	640	830	960	90	700	901	915	165	200	710	710	-	M24	684	4.5
750 30	750 30	150 6	840	530	823	1340	590	1030	1080	120	590	450	1118	250	100	800	900	-	M30	698	4.5
	750 30	375 15	1250	515	823	1445	615	1030	1055	120	580	930	1118	250	100	800	800	-	M30	915	7.5
	750 30	500 20	1350	515	823	1445	615	1030	1185	120	680	930	1118	250	100	900	900	-	M30	933	8.0
900 36	900 36	150 6	920	630	975	1355	600	1250	1095	120	730	480	1118	250	150	800	800	-	M30	785	6.5
900 36	900 36	600 24	1595	630	975	1750	800	1250	1335	130	100	1540	1118	250	150	1000	1050	-	M36	718	15.0
1050 42	1050 42	150 6	660	705	1050	1616	800	1400	1031	120	710	570	1118	250	150	1050	1050	-	M42	750	9.8
1050 42	1050 42	750 30	2215	700	1159	2100	1000	1390	1598	-	830	1989	1150	350	150	780	820	1000	M39	1473	22.0
1200 48	1200 48	250 10	1240	750	1100	1770	800	1490	1270	120	760	913	1118	250	150	1075	1075	-	M33	1346	13.0
1500 60	1500 60	1200 24	3225	1130	1587	1212	1232	2030	2336	350	927	3228	1150	350	200	1440	1440	1440	M42	1841	72.0